Cisco Catalyst 2960 Series User Manual

PurposeCommand or Action
Specifies a URL for redirection of the user in place of
the default login success page.
ip admission proxy http success redirect url-string
Example:
Switch(config)# ip admission proxy http success
Step 3
redirect www.example.com
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 4
Configuring the Web-Based Authentication Parameters
Follow these steps to configure the maximum number of failed login attempts before the client is placed in a
watch list for a waiting period:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip admission max-login-attempts number
4.
end
5.
show running-config
6.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password
if prompted.
enable
Example:
Switch> enable
Step 1
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1441
How to Configure Web-Based Authentication

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000