CHAPTER 27
Configuring QoS
•
Finding Feature Information, page 539
•
Prerequisites for QoS, page 539
•
Restrictions for QoS, page 541
•
Information About QoS, page 542
•
How to Configure QoS, page 571
•
Monitoring Standard QoS, page 630
•
Configuration Examples for QoS, page 631
•
Where to Go Next, page 641
•
Additional References, page 642
•
Feature History and Information for QoS, page 643
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for QoS
Before configuring standard QoS, you must have a thorough understanding of these items:
•
The types of applications used and the traffic patterns on your network.
•
Traffic characteristics and needs of your network. For example, is the traffic on your network bursty?
Do you need to reserve bandwidth for voice and video streams?
•
Bandwidth requirements and speed of the network.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
539
To Next Page
Loading...
Need help?
General
