Cisco Catalyst 2960 Series User Manual

SUMMARY STEPS
1.
enable
2.
show event manager environment [all| variable-name]
3.
configure terminal
4.
event manager environment variable-name string
5.
Repeat Alphabetical Order of EEM Action Labels for all the required environment variables.
6.
event manager applet applet-name
7.
Do one of the following:
•
event snmp oid oid-value get-type {exact| next} entry-op operator entry-val
entry-value[exit-comb| and}] [exit-op operator] [exit-val exit-value] [exit-time exit-time-value]
poll-interval poll-int-value
8.
action label cli command cli-string [pattern pattern-string]
9.
action label syslog [priority priority-level] msg msg-text facility string
10.
action label mail server server-address to to-address from from-address [cc cc-address]
subject subject body body-text
11.
Add more action commands as required.
12.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
(Optional) Displays the name and value of EEM environment
variables.
show event manager environment [all|
variable-name]
Step 2
Example:
Device# show event manager environment all
•
The optional all keyword displays all the EEM environment
variables.
•
The optional variable-nameargument displays information
about the specified environment variable.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 3
Configures the value of the specified EEM environment variable.
event manager environment variable-name string
Step 4
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1698
How to Write EEM Policies Using the Cisco IOS CLI

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000