Cisco Catalyst 2960 Series

PurposeCommand or Action
Specifies the version of the NetFlow export protocol used
by the exporter.
export-protocol {netflow-v9}
Example:
Switch(config-flow-exporter)# export-protocol
netflow-v9
Step 9
Returns to privileged EXEC mode.end
Example:
Switch(config-flow-record)# end
Step 10
(Optional) Displays information about NetFlow flow
exporters.
show flow exporter [name record-name]
Example:
Switch show flow exporter ExportTest
Step 11
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
Step 12
startup-config
What to Do Next
Define a flow monitor based on the flow record and flow exporter.
Related Topics
Exporters
Example: Configuring a Flow, on page 534
Creating a Flow Monitor
You can create a flow monitor and associate it with a flow record and a flow exporter.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
525
How to Configure NetFlow Lite