Cisco Catalyst 2960 Series User Manual

DescriptionSubevent Type
Total memory use in KB or the actual average
memory utilization for this measured interval.
value
The percentage difference between the oldest sample
in the measured interval and the latest sample; a
negative value represents a decrease.
diff
Elapsed time period for this measured interval.sec , msec
event_register_ipsla
Registers for an event that is triggered by the event ipslacommand. Use this Tcl command to publish an event
when an IPSLA reaction is triggered. The group ID or the operation ID is required to register the event.
Syntax
event_register_ipsla [tag ?] group_name ? operation_id ? [reaction_type ?]
[dest_ip_addr ?][queue_priority low|normal|high|last] [maxrun ?] [nice 0|1]
Arguments
(Optional) String identifying a tag that can be used
with the trigger Tcl command extension to support
multiple event statements within a Tcl script.
tag
(Mandatory) Specifies the IP SLAs group name.group_name
(Mandatory) Specifies the IP SLA operation ID.
Number must be in the range from 1 to 2147483647.
operation_id
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1900
event_register_ipsla

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000