Cisco Catalyst 2960 Series

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesyesnonononononoThe control
packet is
invalid.
This code
applies to
VPDN
sessions.
1603 -
VPDN Bad
Control
Packet
yesyesnonononononoThe
administrator
disconnected.
This code
applies to
VPDN
sessions.
1604 -
VPDN
Admin
Disconnect
yesyesnonononononoThe tunnel
is down or
the setup
failed. This
code
applies to
VPDN
sessions.
1605 -
VPDN
Tunnel
Down/Setup
Fail
yesyesnonononononoThere was
a local PPP
disconnect.
This code
applies to
VPDN
sessions.
1606 -
VPDN
Local PPP
Disconnect
yesyesnonononononoNew
sessions
cannot be
established
on the VPN
tunnel.
This code
applies to
VPDN
sessions.
1607 -
VPDN
Softshut/Session
Limit
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
850
Information About TACACS+