Cisco Catalyst 2960 Series User Manual

SUMMARY STEPS
1.
enable
2.
show event manager policy registered [description [policy-name] | detailed policy-filename [system
| user] | [event-type event-name] [system | user] [time-ordered | name-ordered]]
3.
configure terminal
4.
event manager scheduler suspend
5.
exit
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
(Optional) Displays the EEM policies that are currently
registered.
show event manager policy registered [description
[policy-name] | detailed policy-filename [system | user]
Step 2
| [event-type event-name] [system | user] [time-ordered
| name-ordered]]
•
The optional systemand user keywords display the
registered system and user policies.
Example:
Device# show event manager policy registered
•
If no keywords are specified, EEM registered policies
for all event types are displayed in time order.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 3
Immediately suspends the execution of all EEM policies.event manager scheduler suspend
Example:
Device(config)# event manager scheduler suspend
Step 4
Exits global configuration mode and returns to privileged
EXEC mode.
exit
Example:
Device(config)# exit
Step 5
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1705
How to Write EEM Policies Using the Cisco IOS CLI

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000