Cisco Catalyst 2960 Series User Manual

ResultEncryptionAuthenticationLevelModel
Uses a username
match for
authentication.
NoUsernamenoAuthNoPrivSNMPv3
Provides
authentication based
on the HMAC-MD5
or HMAC-SHA
algorithms.
NoMessage Digest 5
(MD5) or Secure
Hash Algorithm
(SHA)
authNoPrivSNMPv3
Provides
authentication based
on the HMAC-MD5
or HMAC-SHA
algorithms.
Allows specifying
the User-based
Security Model
(USM) with these
encryption
algorithms:
•
DES 56-bit
encryption in
addition to
authentication
based on the
CBC-DES
(DES-56)
standard.
•
3DES 168-bit
encryption
•
AES 128-bit,
192-bit, or
256-bit
encryption
Data Encryption
Standard (DES) or
Advanced
Encryption Standard
(AES)
MD5 or SHAauthPrivSNMPv3
You must configure the SNMP agent to use the SNMP version supported by the management station. Because
an agent can communicate with multiple managers, you can configure the software to support communications
using SNMPv1, SNMPv2C, or SNMPv3.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
447
Prerequisites for SNMP

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000