Cisco Catalyst 2960 Series User Manual

DescriptionEvent Type
An ASCII string that represents the name of the event
for this event type.
event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM.
event_pub_sec event_pub_msec
Number of subevents.num_subs
Where the subevent info string is for a CPU_UTIL subevent,
"{type %s procname {%s} pid %u taskname {%s} taskid %u value %u sec %ld msec %ld}"
DescriptionSubevent Type
Type of subevent.type
POSIX process name for this subevent.procname
POSIX process ID for this subevent.pid
Cisco IOS task name for this subevent.taskname
Cisco IOS task ID for this subevent.taskid
Actual average CPU utilization over the measured
interval.
value
Elapsed time period for this measured interval.sec , msec
Where the subevent info string is for a MEM_UTIL subevent,
"{type %s procname {%s} pid %u taskname {%s} taskid %u is_percent %s value %u diff %d"
"sec %ld msec %ld}"
DescriptionSubevent Type
Type of subevent.type
POSIX process name for this subevent.procname
POSIX process ID for this subevent.pid
Cisco IOS task name for this subevent.taskname
Cisco IOS task ID for this subevent.taskid
TRUE or FALSE depending on whether the value is
a percentage value.
is_percent
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1899
event_register_ioswdsysmon

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000