Cisco Catalyst 2960 Series User Manual

PurposeCommand
Displays parameters for all VLANs or the specified
VLAN on the switch. The following command
options are available:
• brief—Displays VTP VLAN status in brief.
• group—Displays the VLAN group with its
name and the connected VLANs that are
available.
• id—Displays VTP VLAN status by
identification number.
• ifindex—Displays SNMP ifIndex.
• mtu—Displays VLAN MTU information.
• name—Display the VTP VLAN information
by specified name.
• remote-span–Displays the remote SPAN
VLANs.
• summary—Displays a summary of VLAN
information.
show vlan [brief | group [group-name name] |id
vlan-id | ifindex | internal | mtu | name name
|remote-span | summary]]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2125
Monitoring VLANs

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000