Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesnononononoIndicates the
type of
physical port
the network
access server
is using to
authenticate
the user.
Physical
ports are
indicated by
a numeric
value as
follows:
•
0:
Asynchronous
•
1:
Synchronous
•
2:
ISDN-Synchronous
•
3:
ISDN-Asynchronous
(V.120)
•
4:
ISDN-
Asynchronous
(V.110)
•
5:
Virtual
Used with
service=any
and
protocol=aaa.
port-type
yesyesyesyesnononoInstructs the
Cisco router
not to use
slot
compression
when
sending
VJ-compressed
packets over
a PPP link.
ppp-vj-slot-
compression
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
803
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000