PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 8
Verifies the configuration.Use one of the following:
Step 9
•
show mvr
•
show mvr interface
•
show mvr members
Example:
Switch# show mvr interface
Port Type Status
Immediate Leave
---- ---- -------
---------------
Gi1/0/2 RECEIVER ACTIVE/DOWN
ENABLED
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
Step 10
startup-config
Configuring IGMP Profiles
Follow these steps to create an IGMP profile:
This task is optional.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
151
How to Configure IGMP Snooping and MVR
To Next Page
Loading...
