Cisco Catalyst 2960 Series User Manual

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesyesyesyesnonononoThe
modem
never
detected
data carrier
detect
(DCD).
This code
can appear
if a
disconnect
occurs
during the
initial
modem
connection.
1010 - No
Carrier
yesyesyesyesnonononoThe
modem
detected
DCD but
became
inactive.
This code
can appear
if a
disconnect
occurs
during the
initial
modem
connection.
1011 - Lost
Carrier
yesyesyesyesnonononoThe result
codes could
not be
parsed.
This code
can appear
if a
disconnect
occurs
during the
initial
modem
connection.
1012 - No
Modem
Results
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
831
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000