Cisco Catalyst 2960 Series User Manual

Specifies the length of the network mask in bits. The
bit mask can be a number from 0 to 32.
•
ge --(Optional) Specifies the minimum prefix
length to be matched. The ge keyword
represents greater than or equal to operator.
•
le --(Optional) Specifies the maximum prefix
length to be matched. The le keyword represents
the less than or equal to operator.
•
ne --(Optional) Specifies the prefix length not
to be matched. The ne keyword represents not
equal to operator.
When ge, le and ne keywords are not configured, an
exact match of network length is processed.
length
(Optional) Specifies the desired policy trigger. The
type options are add, remove, modify, and all. The
default is all.
type
(Optional) Specifies the protocol value for the
network being monitored.
One of the following protocols can be used: all, bgp,
connected, eigrp, isis, iso-igrp, mobile, odr, ospf,
rip, and static. The default is all.
protocol
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1928
event_register_routing

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000