Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesnononoASCII
access list
identifier for
an input
access list to
be installed
and applied
to an
interface for
the duration
of the
current
connection.
Used with
service=ppp
and
protocol=ip,
and service
service=ppp
and protocol
=ipx.
Per-user
access lists
do not
currently
work with
ISDN
interfaces.
inacl#<n>
yesyesyesyesyesyesyesASCII
identifier for
an interface
input access
list. Used
with
service=ppp
and
protocol=ip.
Per-user
access lists
do not
currently
work with
ISDN
interfaces.
inacl=x
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
789
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000