Cisco Catalyst 2960 Series User Manual

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesyesyesyesnonononoThe call
disconnected
because the
call
duration
exceeded
the
maximum
amount of
time
allowed by
the Max
Call Mins
or Max
DS0 Mins
parameter
on the
access
server.
1195 - Call
Duration
yesyesnonononononoThe user
disconnected.
This value
applies to
virtual
private
dial-up
network
(VPDN)
sessions.
1600 -
VPDN
User
Disconnect
yesyesnonononononoCarrier loss
has
occurred.
This code
applies to
VPDN
sessions.
1601 -
VPDN
Carrier
Loss
yesyesnonononononoThere are
no
resources.
This code
applies to
VPDN
sessions.
1602 -
VPDN No
Resources
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
849
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000