Cisco Catalyst 2960 Series User Manual

PurposeCommand
Displays the UDI information
for a standalone switch or the
specified stack members and
for all the connected FRU
devices: the PID, the VID, and
the serial number.
show logging onboard [module[switch-number ]] environment
Switch# show logging onboard 1 environment
Displays the hardware-related
messages generated by a
standalone switch or the
specified stack members.
show logging onboard [module[switch-number ]] message
Switch# show logging onboard 1 message
Displays the power
consumption of PoE ports on
a standalone switch or the
specified stack members.
show logging onboard [module[switch-number ]] poe
Switch# show logging onboard 1 poe
Displays the temperature of a
standalone switch or or the
specified stack members.
show logging onboard [module[switch-number ]] temperature
Switch# show logging onboard 1 temperature
Displays the time when a
standalone switch or the
specified stack members start,
the reason the standalone
switch or specified stack
members restart, and the length
of time that the standalone
switch or the specified stack
members have been running
since they last restarted.
show logging onboard [module[switch-number ]] uptime
Switch# show logging onboard 1 uptime
Displays the system voltages
of a standalone switch or the
specified stack members.
show logging onboard [module[switch-number ]] voltage
Switch# show logging onboard 1 voltage
Displays the data in the
continuous file.
show logging onboard [module[switch-number ]] continuous
Switch# show logging onboard 1 continuous
Displays both the continuous
and summary data .
show logging onboard [module[switch-number ]] detail
Switch# show logging onboard 1 detail
Displays end time and date on
a standalone switch or the
specified stack members.
show logging onboard [module[switch-number ]] endhh:mm:ss
Switch# show logging onboard 1
end 13:00:15 jul 2013
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1647
Verifying Troubleshooting of the Software Configuration

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000