Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesnononoSpecifies
user-specific
AAA
interface
configuration
information
with Virtual
Profiles. The
information
that follows
the equal
sign (=) can
be any Cisco
IOS interface
configuration
command.
Multiple
instances of
the attributes
are allowed,
but each
instance
must have a
unique
number.
Used with
service=ppp
and
protocol=lcp.
This attribute
replaces the
“interface-config=”
attribute.
Note
interface-config#<n>
yesyesyesyesyesnonoSpace-separated
list of
possible IP
addresses
that can be
used for the
end-point of
a tunnel.
Used with
service=ppp
and
protocol=vpdn.
ip-addresses
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
790
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000