Cisco Catalyst 2960 Series

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesnononononoSpecifies the
number of
seconds for
the hello
keepalive
interval.
Hello
packets are
sent when no
data has
been sent on
a tunnel for
the number
of seconds
configured
here. Used
with
service=ppp
and
protocol=vpdn.
l2tp-hello-
interval
yesyesnononononoWhen
enabled,
sensitive
AVPs in
L2TP control
messages are
scrambled or
hidden. Used
with
service=ppp
and
protocol=vpdn.
l2tp-hidden-avp
yesyesnononononoSpecifies the
number of
seconds that
a tunnel will
stay active
with no
sessions
before
timing out
and shutting
down. Used
with
service=ppp
and
protocol=vpdn.
l2tp-nosession-
timeout
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
793
Information About TACACS+