Cisco Catalyst 2960 Series User Manual

(Optional) If is_percent is set to TRUE, the time
period for the percentage to be computed. Otherwise,
the time period for the collection samples to be
averaged (specified in SSSSSSSSSS[.MMM] format,
where SSSSSSSSSS must be an integer representing
seconds between 0 and 4294967295, inclusive, and
where MMM must be an integer representing
milliseconds between 0 and 999). If this argument is
not specified, the most recent sample is used.
This argument is mandatory if is_percent is
set to TRUE; otherwise, it is optional.
Note
period
Result String
None
Set _cerrno
No
Event_reqinfo
"event_id %u event_type %u event_type_string {%s} %u event_pub_sec %u event_pub_msec %u"
"num_subs %u"
DescriptionEvent Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
event_id
Type of event.event_type
An ASCII string that represents the name of the event
for this event type.
event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM.
event_pub_sec event_pub_msec
Subevent number.num_subs
Where the subevent info string is for a deadlock subevent:
"{type %s num_entries %u entries {entry 1, entry 2, ...}}"
DescriptionSubevent Type
Type of wdsysmon subevent.type
Number of processes and threads in the deadlock.num_entries
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1965
event_register_wdsysmon

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000