Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesyesyesnoThe number
of a rotary
group
(between 0
and 100
inclusive) to
use for
callback (for
example:
callback-rotary=34).
Used with
service=arap,
service=slip,
service=ppp,
service=shell.
Not valid for
ISDN.
callback-rotary
yesyesyesyesyesyesyesAn argument
to a shell
(EXEC)
command.
This
indicates an
argument for
the shell
command
that is to be
run. Multiple
cmd-arg
attributes can
be specified,
and they are
order
dependent.
This
TACACS+
AV
pair
cannot
be used
with
RADIUS
attribute
26.
Note
cmd-arg=x
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
785
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000