DescriptionEvent Type
The LLDP system capabilities field from the LLDP
cache entry. Provided as a string that can contain O,
P, B, W, R, T, C, S or any combination of these
separated by commas.
nd_lldp_system_capabilities_string
The LLDP enabled system capabilities field from the
LLDP cache entry. Provided as a string that can
contain O, P, B, W, R, T, C, S or any combination of
these separated by commas.
nd_lldp_enabled_capabilities_string
The LLDP system capabilities bits field from the
LLDP cache entry. Provided as a hexadecimal number
preceded by 0x.
nd_lldp_system_capabilities_bits
The LLDP enabled capabilities bits field from the
LLDP cache entry. Provided as a hexadecimal number
preceded by 0x.
nd_lldp_enabled_capabilities_bits
The LLDP capabilities bits field from the LLDP cache
entry. Provided as a hexadecimal number preceded
by 0x.
nd_lldp_capabilities_bits
A series of values that will be set to YES if that bit
in the capabilities field is set or NO if it is not set.
nd_lldp_capabilities_bit_[0-31]
event_register_nf
Registers for an event when a NetFlow event is triggered by the event nfcommand. Use this Tcl command
to publish an event when an NetFlow reaction is triggered..
Syntax
event_register_nf [tag ?] monitor_name ? event_type create|update|delete
exit_event_type create|update|delete event1-event4 ? [maxrun ?] [nice 0|1]
Arguments
(Optional) String identifying a tag that can be used
with the trigger Tcl command extension to support
multiple event statements within a Tcl script.
tag
(Mandatory) The name of the NetFlow monitor.monitor_name
(Mandatory) The type of event to monitor for the
create, update, and delete flow.
event_type
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1910
event_register_nf
To Next Page
Loading...
Need help?
General
