Cisco Catalyst 2960 Series User Manual

Related Topics
SNMP Notifications, on page 450
Monitoring SNMP Status, on page 467
Setting the Agent Contact and Location Information
Follow these steps to set the system contact and location of the SNMP agent so that these descriptions can be
accessed through the configuration file.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
snmp-server contact text
4.
snmp-server location text
5.
end
6.
show running-config
7.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your
password if prompted.
enable
Example:
Switch> enable
Step 1
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Sets the system contact string.
snmp-server contact text
Example:
Switch(config)# snmp-server contact Dial System
Operator at beeper 21555
Step 3
Sets the system location string.
snmp-server location text
Example:
Switch(config)# snmp-server location Building 3/Room
222
Step 4
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
464
How to Configure SNMP

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000