Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesnononononoCopies the
IP ToS field
from the IP
header of
each payload
packet to the
IP header of
the tunnel
packet for
packets
entering the
tunnel at the
LNS. Used
with
service=ppp
and
protocol=vpdn.
l2tp-tos-reflect
yesyesnononononoIf this
attribute is
set, it
performs
L2TP tunnel
authentication.
Used with
service=ppp
and
protocol=vpdn.
l2tp-tunnel-
authen
yesyesnononononoShared secret
used for
L2TP tunnel
authentication
and AVP
hiding. Used
with
service=ppp
and
protocol=vpdn.
l2tp-tunnel-
password
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
794
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000