Event_reqinfo
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u"
"sub_system 0x%x instance %u process_name {%s} path {%s} exit_status 0x%x"
"respawn_count %u last_respawn_sec %ld last_respawn_msec %ld fail_count %u"
"dump_count %u node_name {%s}"
DescriptionEvent Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
event_id
Type of event.event_type
An ASCII string that represents the name of the event
for this event type.
event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM.
event_pub_sec event_pub_msec
Number assigned to the EEM policy that published
the application-specific event. Number is set to 798
because all other numbers are reserved for Cisco use.
sub_system
Process instance ID.instance
Process name.process_name
Process absolute name including path.path
Process last exit status.exit_status
Number of times that the process was restarted.respawn_count
The calendar time when the last restart occurred.last_respawn_sec last_respawn_msec
Number of restart attempts of the process that failed.
This count will be reset to 0 when the process is
successfully restarted.
fail_count
Number of core dumps taken of the process.dump_count
Name of the node that the process is on. The node
name is a string that consists of the word "node"
followed by two fields separated by a slash character
using the following format:
node slot-number / cpu-number
The slot-number is the hardware slot number. The
cpu-number is the hardware CPU number.
node_name
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1921
event_register_process
To Next Page
Loading...
Need help?
General
