Cisco Catalyst 2960 Series User Manual

The following example shows the information contained in a TACACS+ network accounting record for a
PPP user who comes in through autoselect:
Wed Jun 27 04:02:19 2001 172.16.25.15 username1 Async5 562/4327528 starttask_id=35
service=ppp
Wed Jun 27 04:02:25 2001 172.16.25.15 username1 Async5 562/4327528 update
task_id=35 service=ppp protocol=ip addr=10.1.1.2
Wed Jun 27 04:05:03 2001 172.16.25.15 username1 Async5 562/4327528 stoptask_id=35
service=ppp protocol=ip addr=10.1.1.2 bytes_in=3366 bytes_out=2149
paks_in=42 paks_out=28 elapsed_time=164
EXEC Accounting
EXEC accounting provides information about user EXEC terminal sessions (user shells) on the network access
server, including username, date, start and stop times, the access server IP address, and (for dial-in users) the
telephone number the call originated from.
The following example shows the information contained in a RADIUS EXEC accounting record for a dial-in
user:
Wed Jun 27 04:26:23 2001
NAS-IP-Address = “172.16.25.15”
NAS-Port = 1
User-Name = “username1”
Client-Port-DNIS = “4327528”
Caller-ID = “5622329483”
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Service-Type = Exec-User
Acct-Session-Id = “00000006”
Acct-Delay-Time = 0
User-Id = “username1”
NAS-Identifier = “172.16.25.15”
Wed Jun 27 04:27:25 2001
NAS-IP-Address = “172.16.25.15”
NAS-Port = 1
User-Name = “username1”
Client-Port-DNIS = “4327528”
Caller-ID = “5622329483”
Acct-Status-Type = Stop
Acct-Authentic = RADIUS
Service-Type = Exec-User
Acct-Session-Id = “00000006”
Acct-Session-Time = 62
Acct-Delay-Time = 0
User-Id = “username1”
NAS-Identifier = “172.16.25.15”
The following example shows the information contained in a TACACS+ EXEC accounting record for a dial-in
user:
Wed Jun 27 03:46:21 2001 172.16.25.15 username1 tty3 5622329430/4327528
start task_id=2 service=shell
Wed Jun 27 04:08:55 2001 172.16.25.15 username1 tty3 5622329430/4327528
stop task_id=2 service=shell elapsed_time=1354
The following example shows the information contained in a RADIUS EXEC accounting record for a Telnet
user:
Wed Jun 27 04:48:32 2001
NAS-IP-Address = “172.16.25.15”
NAS-Port = 26
User-Name = “username1”
Caller-ID = “10.68.202.158”
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1009
Information About Configuring Accounting

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000