Cisco Catalyst 2960 Series User Manual

Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 104: Feature Information for Configuring Accounting
Feature InformationReleasesFeature Name
AAA broadcast accounting allows
accounting information to be sent to
multiple AAA servers at the same time;
that is, accounting information can be
broadcast to one or more AAA servers
simultaneously.
Cisco IOS 15.2(1)EAAA Broadcast Accounting
AAA resource accounting for start-stop
records supports the ability to send a
“start” record at each call setup,
followed by a corresponding “stop”
record at the call disconnect. This
functionality can be used to manage and
monitor wholesale customers from one
source of data reporting, such as
accounting records.
Cisco IOS 15.2(1)EAAA Resource Accounting for
Start-Stop Records
The AAA session MIB feature allows
customers to monitor and terminate their
authenticated client connections using
SNMP. The data of the client is
presented so that it correlates directly
to the AAA Accounting information
reported by either the RADIUS or the
TACACS+ server.
Cisco IOS 15.2(1)EAAA Session MIB
VRRS provides a multiclient
information abstraction and
management service between a First
Hop Redundancy Protocol (FHRP) and
a registered client.
Cisco IOS 15.2(1)EAAA: IPv6 Accounting Delay
Enhancements
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1033
Feature Information for Configuring Accounting

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000