event_register_ipslala
event_register_nfnf
event_register_noneno
event_register_oiroi
event_register_processpr
event_register_rfrf
event_register_resourcers
event_register_routingrt
event_register_rpcrp
event_register_syslogsl
event_register_snmpsn
event_register_snmp_notificationst
event_register_snmp_objectso
event_register_timertm
event_register_tracktr
event_register_timer_subscriberts
event_register_wdsysmonwd
How to Write Embedded Event Manager Policies Using Tcl
Registering and Defining an EEM Tcl Script
Perform this task to configure environment variables and register an EEM policy. EEM schedules and runs
policies on the basis of an event specification that is contained within the policy itself. When an EEM policy
is registered, the software examines the policy and registers it to be run when the specified event occurs.
Before You Begin
You must have a policy available that is written in the Tcl scripting language. Sample policies are provided--see
the details in the Sample EEM Policies, on page 1782 to see which policies are available for the Cisco IOS
release image that you are using--and these sample policies are stored in the system policy directory.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1771
How to Write Embedded Event Manager Policies Using Tcl
To Next Page
Loading...
Need help?
General
