Cisco Catalyst 2960 Series User Manual

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesyesyesyesnonononoSimple
Network
Management
Protocol
(SNMP)
has
disconnected.
1152 -
SNMP
Disc
yesyesyesyesnonononoThe
allowed
retries for
V110
synchronization
have been
exceeded.
1160 -
V110
Retries
yesyesyesyesnonononoAuthentication
timeout.
This code
applies to
PPP
sessions.
1170 - PPP
Auth
Timeout
yesyesyesyesnonononoThe call
disconnected
as the
result of a
local
hangup.
1180 -
Local
Hangup
yesyesyesyesnonononoThe call
disconnected
because the
remote end
hung up.
1185 -
Remote
Hangup
yesyesyesyesnonononoThe call
disconnected
because the
T1 line that
carried it
was
quiesced.
1190 - T1
Quiesced
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
848
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000