Cisco Catalyst 2960 Series

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesyesyesyesnonononoThe user
exited
normally
from a
Telnet
session.
This code
is related to
immediate
Telnet and
raw TCP
disconnects
during a
terminal
server
session.
1022 - TS
Exit Telnet
yesyesyesyesnonononoThe user
could not
switch to
Serial Line
Internet
Protocol
(SLIP) or
PPP
because the
remote host
had no IP
address or
because the
dynamic
pool could
not assign
one. This
code is
related to
immediate
Telnet and
raw TCP
disconnects
during a
terminal
server
session.
1023 - TS
No IP Addr
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
833
Information About TACACS+