Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesyesyesyes (PPP/IP
only)
ASCII
identifier for
an interface
output access
list. Used
with
service=ppp
and
protocol=ip,
and service
service=ppp
and
protocol=ipx.
Contains an
IP output
access list
for SLIP or
PPP/IP (for
example,
outacl=4).
The access
list itself
must be
preconfigured
on the router.
Per-user
access lists
do not
currently
work with
ISDN
interfaces.
outacl=x
yesyesyesyesnononoDefines IP
address
pools on the
network
access
server. Used
with
service=ppp
and
protocol=ip.
pool-def#<n>
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
801
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000