802.1x Accounting
The 802.1x standard defines how users are authorized and authenticated for network access but does not keep
track of network usage. 802.1x accounting is disabled by default. You can enable 802.1x accounting to monitor
this activity on 802.1x-enabled ports:
•
User successfully authenticates.
•
User logs off.
•
Link-down occurs.
•
Re-authentication successfully occurs.
•
Re-authentication fails.
The switch does not log 802.1x accounting information. Instead, it sends this information to the RADIUS
server, which must be configured to log accounting messages.
802.1x Accounting Attribute-Value Pairs
The information sent to the RADIUS server is represented in the form of Attribute-Value (AV) pairs. These
AV pairs provide data for different applications. (For example, a billing application might require information
that is in the Acct-Input-Octets or the Acct-Output-Octets attributes of a RADIUS packet.)
AV pairs are automatically sent by a switch that is configured for 802.1x accounting. Three types of RADIUS
accounting packets are sent by a switch:
• START–sent when a new user session starts
• INTERIM–sent during an existing session for updates
• STOP–sent when a session terminates
You can view the AV pairs that are being sent by the switch by entering the debug radius accounting
privileged EXEC command. For more information about this command, see the Cisco IOS Debug Command
Reference, Release 12.4.
This table lists the AV pairs and when they are sent are sent by the switch.
Table 125: Accounting AV Pairs
STOPINTERIMSTARTAV Pair NameAttribute Number
AlwaysAlwaysAlwaysUser-NameAttribute[1]
AlwaysAlwaysAlwaysNAS-IP-AddressAttribute[4]
AlwaysAlwaysAlwaysNAS-PortAttribute[5]
SometimesSometimes
17
NeverFramed-IP-AddressAttribute[8]
AlwaysAlwaysAlwaysClassAttribute[25]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1332
Information About 802.1x Port-Based Authentication
To Next Page
Loading...
Need help?
General
