Cisco Catalyst 2960 Series User Manual

Connection Accounting
Connection accounting provides information about all outbound connections made from the network access
server such as Telnet, LAT, TN3270, PAD, and rlogin.
The following example shows the information contained in a RADIUS connection accounting record for an
outbound Telnet connection:
Wed Jun 27 04:28:00 2001
NAS-IP-Address = “172.16.25.15”
NAS-Port = 2
User-Name = “username1”
Client-Port-DNIS = “4327528”
Caller-ID = “5622329477”
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Service-Type = Login
Acct-Session-Id = “00000008”
Login-Service = Telnet
Login-IP-Host = “10.68.202.158”
Acct-Delay-Time = 0
User-Id = “username1”
NAS-Identifier = “172.16.25.15”
Wed Jun 27 04:28:39 2001
NAS-IP-Address = “172.16.25.15”
NAS-Port = 2
User-Name = “username1”
Client-Port-DNIS = “4327528”
Caller-ID = “5622329477”
Acct-Status-Type = Stop
Acct-Authentic = RADIUS
Service-Type = Login
Acct-Session-Id = “00000008”
Login-Service = Telnet
Login-IP-Host = “10.68.202.158”
Acct-Input-Octets = 10774
Acct-Output-Octets = 112
Acct-Input-Packets = 91
Acct-Output-Packets = 99
Acct-Session-Time = 39
Acct-Delay-Time = 0
User-Id = “username1”
NAS-Identifier = “172.16.25.15”
The following example shows the information contained in a TACACS+ connection accounting record for
an outbound Telnet connection:
Wed Jun 27 03:47:43 2001 172.16.25.15 username1 tty3 5622329430/4327528
start task_id=10 service=connection protocol=telnet addr=10.68.202.158 cmd=telnet
username1-sun
Wed Jun 27 03:48:38 2001 172.16.25.15 username1 tty3 5622329430/4327528
stop task_id=10 service=connection protocol=telnet addr=10.68.202.158 cmd=telnet
username1-sun bytes_in=4467 bytes_out=96 paks_in=61 paks_out=72 elapsed_time=55
The following example shows the information contained in a RADIUS connection accounting record for an
outbound rlogin connection:
Wed Jun 27 04:29:48 2001
NAS-IP-Address = “172.16.25.15”
NAS-Port = 2
User-Name = “username1”
Client-Port-DNIS = “4327528”
Caller-ID = “5622329477”
Acct-Status-Type = Start
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1011
Information About Configuring Accounting

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000