Cisco Catalyst 2960 Series User Manual

DescriptionAttributeSub-Type NumberVendor-Specific
Company Code
Number
If the fax session aborts,
indicates the system
component that signaled
the abort. Examples of
system components that
could trigger an abort are
FAP (Fax Application
Process), TIFF (the TIFF
reader or the TIFF writer),
fax-mail client, fax-mail
server, ESMTP client, or
ESMTP server.
Abort-Cause21926
H323 Attributes
Indicates the IP address of
the remote gateway.
Remote-Gateway-ID
(h323-remote-address)
23926
Identifies the conference
ID.
Connection-ID
(h323-conf-id)
24926
Indicates the setup time for
this connection in
Coordinated Universal
Time (UTC) formerly
known as Greenwich Mean
Time (GMT) and Zulu
time.
Setup-Time
(h323-setup-time)
25926
Indicates the origin of the
call relative to the
gateway. Possible values
are originating and
terminating (answer).
Call-Origin
(h323-call-origin)
26926
Indicates call leg type.
Possible values are
telephony and VoIP.
Call-Type
(h323-call-type)
27926
Indicates the connection
time for this call leg in
UTC.
Connect-Time
(h323-connect-time)
28926
Indicates the time this call
leg was disconnected in
UTC.
Disconnect-Time
(h323-disconnect-time)
29926
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
913
Information about RADIUS

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000