[severity_fatal] [severity_critical] [severity_major]
[severity_minor] [severity_warning] [severity_notification]
[severity_normal] [severity_debugging]
[maxrun ?] [nice 0|1]
Arguments
(Optional) String identifying a tag that can be used
with the trigger Tcl command extension to support
multiple event statements within a Tcl script.
tag
(Optional) Number of occurrences before the event
is raised; if not specified, the event is raised on the
first occurrence. If specified, the value must be greater
than 0.
occurs
(Optional) Time interval, in seconds and milliseconds,
during which the one or more occurrences must take
place in order to raise an event (specified in
SSSSSSSSSS[.MMM] format where SSSSSSSSSS
must be an integer number representing seconds
between 0 and 4294967295, inclusive, and where
MMM represents milliseconds and must be an integer
number between 0 and 999). If this argument is not
specified, no period check is applied.
period
(Mandatory) A regular expression used to perform
syslog message pattern match. This argument is what
the policy uses to identify the logged syslog message.
pattern
(Optional) The message priority to be screened. If
this argument is specified, only messages that are at
the specified logging priority level, or lower, are
screened. If this argument is not specified, the default
priority is 0.
priority
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1945
event_register_syslog
To Next Page
Loading...
Need help?
General
