Cisco Catalyst 2960 Series User Manual

DescriptionEvent Type
GOLD event severity, which can be one of the
following values:
•
normal
•
minor
•
major.
event_severity
Type of event.event_type
An ASCII string that represents the name of the event
for this event type.
event_type_string
Last fail time, where testnum is the test number. For
example, lf3 is the EEM built-in variable for the last
fail time of test 3.
The timestamp format is mmm dd yyyy hh:mm:ss. For
example, Mar 11 1960 08:47:00.
lf testnum
The new test failure information in a GOLD event
flag: true or false.
new_failure
The overall diagnostic result, which can be one of the
following values:
•
0: OK
•
3: minor error
•
4: major error
•
14: unknown result
overall_result
Port counts.pc
Test total run count, where testnum is the test number.
For example, rc3 is the EEM built-in variable for the
total run count of test 3.
rc testnum
Card serial number.sn
The subcard on which a GOLD failure event was
detected.
sub_card
Test attribute, where testnum is the test number. For
example, ta3 is the EEM built-in variable for the test
attribute of test 3.
ta testnum
Test counts.tc
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1885
event_register_gold

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000