Cisco Catalyst 2960 Series User Manual

Feature Information for Creating an IP Access List to Filter
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 117: Feature Information for Creating an IP Access List to Filter
Feature Configuration InformationReleasesFeature Name
This feature allows you to filter packets having
IP Options, in order to prevent routers from
becoming saturated with spurious packets.
Cisco IOS 15.2(2)EACL Support for Filtering IP
Options
This feature provides a flexible mechanism for
filtering on TCP flags. The ACL TCP Flags
Filtering feature allows you to select any
combination of flags on which to filter. The
ability to match on a flag set and on a flag not
set gives you a greater degree of control for
filtering on TCP flags, thus enhancing security.
Cisco IOS 15.2(2)EACL TCP Flags Filtering
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1244
Feature Information for Creating an IP Access List to Filter

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000