Cisco Catalyst 2960 Series User Manual

The following table lists the cause codes and descriptions for the Disconnect Cause Extended (disc-cause-ext)
attribute.
Table 88: Disconnect Cause Extensions
12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesyesyesyesnonononoNo reason
for the
disconnect.
1000 - No
Reason
yesyesyesyesnonononoThe event
was not a
disconnect.
1001 - No
Disconnect
yesyesyesyesnonononoThe reason
for the
disconnect
is
unknown.
This code
can appear
when the
remote
connection
goes down.
1002 -
Unknown
yesyesyesyesnonononoThe call
has
disconnected.
1003 - Call
Disconnect
yesyesyesyesnonononoCalling line
ID (CLID)
authentication
has failed.
1004 -
CLID Auth
Fail
yesyesyesyesnonononoThe
modem is
not
available.
1009 - No
Modem
Available
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
830
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000