Cisco Catalyst 2960 Series User Manual

•
value is 0.
•
diff is the percentage difference between the first process used memory sample ever collected and the
latest process used memory sample.
•
sec and msec are the actual time difference between the time stamps of the first process used memory
sample ever collected and the latest process used memory sample.
For mem_tot_avail Subevent
"{type %s node {%s} is_percent %s used %u avail %u diff %d sec %ld msec %ld}"
DescriptionSubevent Type
Type of wdsysmon subevent.type
Name of the node for which the total available
memory is being monitored.
node
Can be either TRUE or FALSE. TRUE means that
the value is a percentage value; FALSE means that
the value is an absolute value (may be an averaged
value).
is_percent
If the sec and msec variables are specified as 0 or are
unspecified in the event registration Tcl command
extension, the total used memory is in the latest
sample. If a time window is specified and is greater
than zero in the event registration Tcl command
extension, the averaged total used memory utilization
is in the given time window.
used
If the sec and msec variables are specified as 0 or are
unspecified in the event registration Tcl command
extension, the avail is in the latest total available
memory sample. If a time window is specified and is
greater than zero in the event registration Tcl
command extension, the avail is the total available
memory utilization in the specified time window.
avail
If the sec and msec variables are specified as 0 or are
unspecified in the event registration Tcl command
extension, the diff is the percentage difference
between the first total available memory sample ever
collected and the latest total available memory sample.
If a time window is specified and is greater than zero
in the event registration Tcl command extension, the
diff is the percentage difference between the oldest
and latest total available memory utilization in the
specified time window.
diff
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1971
event_register_wdsysmon

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000