Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesnononononoIf a
vpdn-group
on an LNS
uses a
virtual-template
that is
configured to
be
pre-cloned,
this attribute
will control
the
disposition
of a new
L2TP
session that
finds no
pre-cloned
interface to
which to
connect. If
the attribute
is true (the
default), the
session will
be
disconnected
by the LNS.
Otherwise, a
new
interface will
be cloned
from the
virtual-template.
Used with
service=ppp
and
protocol=vpdn.
l2tp-busy-
disconnect
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
791
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000