Cisco Catalyst 2960 Series User Manual

DescriptionSubevent Type
Name of the node that process B thread is on.b_node
Name of process B.b_procname
Process ID of process B.b_pid
Thread ID of process B thread n; 0 means that process
A thread m is blocked on all threads of process B.
b_tid
For dispatch_mgr Subevent
"{type %s node {%s} procname {%s} pid %u value %u sec %ld msec %ld}"
DescriptionSubevent Type
Type of wdsysmon subevent.type
Name of the node that the POSIX process is on.node
POSIX process name for this subevent.procname
POSIX process ID for this subevent.
The three fields above describe the owner
process of this dispatch manager.
Note
pid
If the sec and msec variables are specified as 0 or are
unspecified in the event registration Tcl command
extension, the number of events processed by the
dispatch manager is in the latest sample. If a time
window is specified and is greater than zero in the
event registration Tcl command extension, the total
number of events processed by this dispatch manager
is in the given time window.
value
If the sec and msec variables are specified as 0 or are
unspecified in the event registration Tcl command
extension, they are both 0. If a time window is
specified and is greater than zero in the event
registration Tcl command extension, the sec and msec
variables are the actual time difference between the
time stamps of the oldest and latest samples in this
time window.
sec msec
For cpu_proc Subevent
"{type %s node {%s} procname {%s} pid %u value %u sec %ld msec %ld}"
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1967
event_register_wdsysmon

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000