(Optional) Maximum run time of the script (specified
in SSSSSSSSSS[.MMM] format, where SSSSSSSSSS
must be an integer representing seconds between 0
and 4294967295, inclusive, and where MMM must
be an integer representing milliseconds between 0
and 999). If this argument is not specified, the default
20-second run-time limit is used.
maxrun
(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0.
nice
Table 183: Time and Date When CRON Events Will Be Triggered
Allowed ValuesField
0-59minute
0-23hour
1-31day of month
1-12 (or names, see below)month
0-7 (0 or 7 is Sun, or names; see the table titled
"Special Strings for cron_entry")
day of week
Table 184: Special Strings for cron_entry
MeaningString
Trigger once a year, "0 0 1 1 *".@yearly
Same as @yearly.@annually
Trigger once a month, "0 0 1 * *".@monthly
Trigger once a week, "0 0 * * 0".@weekly
Trigger once a day, "0 0 * * *".@daily
Same as @daily.@midnight
Trigger once an hour, "0 * * * *".@hourly
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1952
event_register_timer
To Next Page
Loading...
