Cisco Catalyst 2960 Series

Set _cerrno
Yes
sys_reqinfo_proc
Queries the information about a single POSIX process. This Tcl command extension is supported only in
Software Modularity images.
Syntax
sys_reqinfo_proc job_id ?
Arguments
(Mandatory) System manager assigned job ID for the
process. Must be an integer between 1 and
4294967295, inclusive.
job_id
Result String
job_id %u component_id 0x%x name {%s} helper_name {%s} helper_path {%s} path {%s}
node_name {%s} is_respawn %u is_mandatory %u is_hold %u dump_option %d
max_dump_count %u respawn_count %u fail_count %u dump_count %u
last_respawn_sec %ld last_respawn_msec %ld inst_id %u proc_state %s
level %d exit_status 0x%x exit_type %d
System manager assigned job ID for the process. An
integer between 1 and 4294967295, inclusive.
job_id
Version manager assigned component ID for the
component to which the process belongs.
component_id
Process name.name
Helper process name.helper_name
Executable path of the helper process.helper_path
Executable path of the process.path
System manager assigned node name for the node to
which the process belongs.
node_name
Flag that specifies that the process can be respawned.is_respawn
Flag that specifies that the process must be alive.is_mandatory
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2002
sys_reqinfo_proc