Cisco Catalyst 2960 Series

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesnononononononoThis code
is returned
when the
circuit or
channel
that is
indicated
by the
requesting
entity
cannot be
provided
by the
other side
of the
interface.
This code
applies to
ISDN or
modem
calls that
came in
over ISDN.
1844 -
Q850
Requested
Channel
Not
Available
yesnononononononoThe call
was
preempted.
This code
applies to
ISDN or
modem
calls that
came in
over ISDN.
1845 -
Q850 Call
Pre-empted
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
866
Information About TACACS+