Event_reqinfo
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u
event_severity %u arg %u"
DescriptionEvent Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
event_id
Type of event.event_type
An ASCII string that represents the name of the event
for this event type.
event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM.
event_pub_sec event_pub_msec
The severity of the event.event_severity
The parameters that are passed from the XML SOAP
command to the script.
argc
arg1
arg2
arg3
arg4
arg6
arg7
arg8
arg9
arg10
arg11
arg12
arg13
arg14
arg15
event_register_oir
Registers for an online insertion and removal (OIR) event. Use this Tcl command extension to run a policy
on the basis of an event raised when a hardware card OIR occurs. These events are handled by the OIR event
detector that screens for this event.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1916
event_register_oir
To Next Page
Loading...
