Cisco Catalyst 2960 Series User Manual

Switch(config)# interface GigabitEthernet1/0/1
Switch(config-if)# ip flow monitor monitor1 sampler SampleTest input
Switch(config-if)# end
Related Topics
Creating a Flow Record, on page 520
Flow Records, on page 512
Creating a Flow Exporter, on page 523
Exporters
Creating a Flow Monitor, on page 525
Monitors
Creating a Sampler
Samplers
Additional References
Related Documents
Document TitleRelated Topic
Flexible NetFlow Command
Reference, Cisco IOS XE Release
3SE (Cisco WLC 5700 Series)
Flexible NetFlow CLI Commands
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Standards and RFCs
TitleStandard/RFC
Cisco Systems NetFlow Services Export Version 9RFC 3954
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
535
Additional References

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000