Cisco Catalyst 2960 Series User Manual

DescriptionEnvironment Variable
The SNMP PDU varbind information._x_x_x_x_x_x_x(varbinds)
Indicates whether the varbind information has been
truncated due to the lack of space in the buffer.
_snmp_notif_trunc_vb_buf
Syslog Event Detector
The syslog message that caused the event to be
published.
_syslog_msg
System Manager (Process) Event Detector
The number of times that a Posix process was
dumped.
_process_dump_count
The status of the Posix process at exit._process_exit_status
The number of times that a Posix process failed._process_fail_count
The instance number of the Posix process._process_instance
The Posix process that was last respawned._process_last_respawn
The node name of the Posix process._process_node_name
The path of the Posix process._process_path
The name of the Posix process._process_process_name
The number of times that a Posix process was
respawned.
_process_respawn_count
Timer Event Detector
The time available before the timer expires.
This environment variable is not available
for the CRON timer.
Note
_timer_remain
The time at which the last event was triggered._timer_time
The type of timer._timer_type
Watchdog System Monitor (IOSWDSysMon) Event
Detector
The slot number for the Route Processor (RP)
reporting node.
_ioswd_node
The number of subevents present._ioswd_num_subs
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1692
Information About Writing EEM Policies Using the Cisco IOS CLI

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000