CHAPTER 59
Configuring Web-Based Authentication
The Web-Based Authentication feature, also known as web authentication proxy, authenticates end users on
host systems that do not run the IEEE 802.1x supplicant.
•
Finding Feature Information, page 1415
•
Information About Web-Based Authentication, page 1415
•
How to Configure Web-Based Authentication, page 1432
•
Configuration Examples for Web-Based Authentication, page 1449
•
Additional References for Web-Based Authentication, page 1451
•
Feature Information for Web-Based Authentication, page 1452
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Information About Web-Based Authentication
Web-Based Authentication Overview
Use the web-based authentication feature, known as web authentication proxy, to authenticate end users on
host systems that do not run the IEEE 802.1x supplicant.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1415
To Next Page
Loading...
Need help?
General
