CHAPTER 5
Configuring LLDP, LLDP-MED, and Wired
Location Service
•
Finding Feature Information, page 57
•
LLDP, LLDP-MED, and Wired Location Service Overview, page 57
•
How to Configure LLDP, LLDP-MED, and Wired Location Service, page 62
•
Configuration Examples for LLDP, LLDP-MED, and Wired Location Service, page 74
•
Monitoring and Maintaining LLDP, LLDP-MED, and Wired Location Service, page 74
•
Additional References for LLDP, LLDP-MED, and Wired Location Service, page 75
•
Feature Information for LLDP, LLDP-MED, and Wired Location Service, page 76
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
LLDP, LLDP-MED, and Wired Location Service Overview
LLDP
The Cisco Discovery Protocol (CDP) is a device discovery protocol that runs over Layer 2 (the data link layer)
on all Cisco-manufactured devices (routers, bridges, access servers, switches, and controllers). CDP allows
network management applications to automatically discover and learn about other Cisco devices connected
to the network.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
57
To Next Page
Loading...
Need help?
General
