Cisco Catalyst 2960 Series User Manual

Additional References for Switch Stacks
Related Documents
Document TitleRelated Topic
Catalyst 2960-X Switch Hardware Installation Guide
http://www.cisco.com/c/en/us/td/docs/switches/lan/
catalyst2960cx_3650cx/hardware/installation/guide/
b_2960cx-3560cx_hig.html
Cabling and powering on a switch stack.
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Standards and RFCs
TitleStandard/RFC
—
None
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and software images, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
All supported MIBs for this release.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
747
Additional References for Switch Stacks

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000